您好,欢迎访问衢州市荣胜环保科技有限公司!

热线电话:0570-3033813

产品中心
联系方式

contact us

衢州市荣胜环保科技有限公司

联系人:姜晓云|姜霄飞

电话:18606813001|13957030848

地址:浙江省衢州市经济技术开发区(东港一路8号)

热门标签

铝屑双室炉生产线

铝屑双室炉生产线
详细内容

双室铝屑炉

 

 熔屑原理:

利用铝水泵输送铝水,在侧井内形成一个吸料漩涡,将铝屑等轻薄料吸入铝水内熔化,降低熔化烧损。

设备组成:

熔炉部分:加热室、侧井(熔化室)、铝水泵、扒灰室、蓄热烧嘴。

铝屑输送预热线组成:筛桶、螺旋料仓、提升机、甩干机、烘干机、高温磁选机、烟气处理炉等。

 

烟气预热、处理特点:

1、利用炉膛烟气和烟气焚烧热量双路预热自动控制。在烟气预热过程中,各个入口均采用密封处理,最大限度地减少空气进入烘干桶,减少预热烟气的排放量,提高预热效率。

2、由于烘干后的烟气含有大量的充分燃烧的有机物,需要对其升温至800℃以后在排放处理,采用公司专利技术——不换向的蓄热烧嘴可以将排放的烟气中的能量大幅回收,重新用于烟气的焚烧,最高可节能50%以上。

 

Dual-chamber Aluminum Scrap Furnace

Melting scrap principle:

Use aluminum water pump to deliver aluminum water and form a suction vortex in the side of the well. The aluminum scrap and other lightweight materials sucked into the aluminum water to melt, lower the melting burning.

Equipment consists of:

Furnace parts: the heating chamber, lateral wells (melting chamber), aluminum water pump, Ash discharge chamber, regenerative burners.

Aluminum scrap pre-delivery hotline: the sieve drum, spiral silos, elevators, drying machine, dryer, high-temperature separator, flue gas treatment furnace.

Flue gas preheating and handling features:

1, Use furnace flue gas and flue gas incineration heat to realise dual preheat automatic control. In the flue gas preheating process, each entry are sealed, that minimize air into the drying tub, reduce emissions of preheated flue gas, and improve preheat efficiency.

2, As the flue gas which after drying contains a lot of incomplete combustion of organic matter, need to heat it to 800 to discharge. Uses patented technology – Non-commutative regenerative burner can substantial recovery the energy in flue gas, and re-use in flue gas incineration, thus energy saving can be maximum to over 50%.

 

 


本文标签:
相关资讯